Cortona Anthracite 2cm Porcelain Paver – Monochrome Series
$0.00
Deep charcoal porcelain paver with a fine, granular stone texture and subtle tonal movement. Dense, low-maintenance 2cm porcelain for rooftops, terraces, patios and pool decks.
| Porcelain Tile Technical Data | Value |
|---|---|
| Water Absorption (ASTM C373) | ≤ 0.5% |
| Breaking Strength (ASTM C648) | ≥ 2,800 lbf |
| Chemical Resistance (ASTM C650) | Class A |
| Stain Resistance (ASTM C1378) | Class A |
| Frost Resistance (ASTM C1026) | Resistant |
| Dynamic Coefficient of Friction, DCOF (ANSI A137.1) | ≥ 0.42 |
| Shade and Texture Rating (CTDA "V") | V3 |
Request a sample
Returns: this product is not returnable.
Cortona Anthracite 2cm Porcelain Paver – Monochrome Series
The Cortona Anthracite 2cm Porcelain Paver brings the depth of dark natural stone to outdoor spaces without the upkeep. Its rich charcoal surface has a fine, granular texture and soft tonal shifts, giving it the look of slate or dark quartzite. It suits modern rooftop terraces, courtyards, pool surrounds and commercial hardscapes where a bold, grounded floor is the goal.
A Bold, Architectural Color
Anthracite is the darkest color in the Monochrome Series. The surface reads as a near-solid charcoal from a distance, while close up it shows a fine mineral grain and gentle movement across the tile. That balance keeps large areas from looking flat without competing with the design around them.
The dark tone frames light-colored furniture, planters and wall finishes, and pairs naturally with steel, glass and concrete architecture. It also works as a contrast border or walkway alongside lighter porcelain colors. Its shade variation is rated V3 (moderate variation).
Cortona Anthracite is a natural fit for modern rooftop lounges, penthouse terraces and restaurant patios that want a dramatic, evening-ready look. Under string lights or around a fire table, the dark surface creates a warm, intimate atmosphere, and by day it gives planters and furniture a crisp backdrop. In larger spaces, it can define zones, such as a charcoal dining area set into a lighter field or a dark path leading to a seating area. Because a deep color absorbs more of the sun's heat than a light one, it is especially well suited to shaded terraces, covered areas and evening spaces, or to borders and accents on exposed rooftops.
Engineered for Outdoor Performance
Cortona Anthracite is made from dense, fired porcelain rather than quarried stone. It absorbs very little water, does not need sealing, and resists stains from food, drinks and planters. It is rated frost resistant (ASTM C1026). The color is fired into the tile, so it holds up to years of sun without fading.
The 2cm (3/4") thickness gives each paver the strength needed for exterior use, including elevated installations where pavers span between supports.
Slip Resistance and Surface Safety
The textured, matte surface provides traction for bare feet and shoes alike, wet or dry. Its DCOF slip rating is 0.42 or higher (ANSI A137.1). That makes it a practical choice around pools, outdoor showers, entrances and busy pedestrian areas, where a dark, low-glare finish is also easier on the eyes in bright sun.
Built for Rooftops and Pedestal Systems
Cortona Anthracite can be installed on adjustable pedestals, sand, gravel or mortar. On rooftops, SkyDeck pedestal systems raise the pavers above the membrane, level the surface over sloped roofs, and let water drain freely underneath. Pavers lift out individually for roof inspections or repairs.
Consistent dimensions keep joints straight and spacing even, so layouts stay clean on large terraces and detailed patterns alike.
Why Choose Cortona Anthracite 2cm Porcelain Paver – Monochrome Series?
-
Deep charcoal color with a fine, natural stone texture
-
Dense 2cm porcelain for residential and commercial outdoor spaces
-
Slip-resistant surface: DCOF of 0.42 or higher (ANSI A137.1)
-
No sealing needed; resists stains and fading
-
Works on pedestals, sand, gravel or mortar
-
Pairs well with lighter porcelain colors for borders and contrast
Bold Design, Lasting Strength
For projects that call for a strong, modern floor, Cortona Anthracite delivers the presence of dark stone with the durability of outdoor porcelain. From rooftop lounges to poolside terraces, it creates a grounded, sophisticated space that stays good-looking for years.
For product specifications, click here
For maintenance and cleaning instructions, click here



Reviews
There are no reviews yet.