Skip to content
CAD & BIM LibraryQuick Pedestal Calculator
Shop

Serena Crosscut Bone 2cm Porcelain Paver – Monochrome Series

$0.00

Soft bone-beige porcelain paver with the cloudy, non-directional texture of crosscut limestone. Light, versatile, low-maintenance 2cm porcelain for rooftops, terraces, patios and pool decks.

Porcelain Tile Technical Data Value
Water Absorption (ASTM C373) ≤ 0.5%
Breaking Strength (ASTM C648) ≥ 350 lbf
Chemical Resistance (ASTM C650) Unaffected
Frost Resistance (ASTM C1026) Resistant
Dynamic Coefficient of Friction, DCOF (ANSI A137.1) 0.90
Shade and Texture Rating (CTDA "V") V3

Request a sample

Returns: this product is not returnable.

Serena Crosscut Bone 2cm Porcelain Paver – Monochrome Series

The Serena Crosscut Bone 2cm Porcelain Paver captures the refined, quiet beauty of natural limestone. A soft bone-beige base carries fine pores and gentle, cloud-like shading, in the style of stone cut across its natural layers. The result is a light, versatile floor for rooftop terraces, patios, courtyards and pool decks.

The Crosscut Limestone Look

In natural stone, a crosscut slab is cut across the layers rather than along them, which produces a soft, mottled pattern with no strong lines. Serena Crosscut Bone recreates that effect. Its surface reads as calm and uniform from a distance, while closer up it shows the fine grain, small pores and subtle tonal clouds of real limestone.

Because the pattern has no direction, the tiles can be laid in any orientation and still look natural. The light, neutral bone color suits nearly any style, from classic European to clean contemporary. Its shade variation is rated V3 (moderate variation).

Serena Crosscut Bone suits projects that call for a refined, natural floor that never feels loud. It brings an old-world European elegance to rooftop terraces, courtyards and pool decks, and pairs well with light plaster, natural wood and soft green planting. Because its pattern is subtle and has no direction, it works well over large areas, such as an open roof deck or a wide terrace, where a strongly veined tile might feel busy. It also flows naturally from light stone floors indoors to an outdoor space, creating a smooth transition between the two. For more warmth or contrast, Serena Crosscut Mocha can be used as a border or in alternating zones.

Limestone Elegance, Porcelain Strength

Natural limestone is soft and porous, which makes it prone to stains, etching and wear outdoors. Serena Crosscut Bone avoids those problems. Its dense porcelain body absorbs very little water, needs no sealing and resists stains from food, drinks and planters, and the color holds up to strong sun. It is rated frost resistant (ASTM C1026). The 2cm (3/4") thickness provides the strength needed for both homes and commercial projects.

Light, Comfortable and Slip-Resistant

The light bone tone reflects much of the sun's heat, keeping the surface more comfortable underfoot. A finely textured finish gives secure footing around pools and outdoor showers, with a DCOF slip rating of 0.90 (ANSI A137.1).

Pedestal-Ready for Rooftop Decks

Serena Crosscut Bone installs on adjustable pedestals, sand, gravel or mortar. On rooftops, SkyDeck pedestals raise each paver above the roof membrane, correct for slope and keep water draining underneath. Pavers can be lifted individually for roof inspections, then set back in place.

Consistent sizing keeps joints tight and even across large areas.

Why Choose Serena Crosscut Bone 2cm Porcelain Paver – Monochrome Series?

  • Soft bone-beige with a cloudy, crosscut limestone texture

  • Non-directional pattern that can be laid in any orientation

  • Light tone that stays comfortable in the sun

  • Slip-resistant surface: DCOF of 0.90 (ANSI A137.1)

  • No staining, etching or sealing like natural limestone

  • 2cm porcelain for pedestal, sand, gravel or mortar installation

Quiet Sophistication for Outdoor Living

Serena Crosscut Bone brings the understated luxury of limestone to rooftops, patios and pool decks, with the strength and easy care of porcelain. It is a light, adaptable floor that lets the rest of an outdoor design shine.

For product specifications, click here

For maintenance and cleaning instructions,  click here

  • Vicki Smeby
    January 2026

    We had a great experience with Skydeck USA. Their team was extremely responsive and easy to work with and the customer service was excellent from start to finish. The Shop drawings were clear and helpful, which made the whole process go smoothly. Best of all, the finished roof deck looks amazing. We couldn't be happier with how it turned out. Highly recommended!!

  • James Hardell
    September 2026

    The highest quality craftsmanship, very friendly, informative and easy working with Skydeck USA team for large or small projects.

  • Jerry Richmond
    September 2026

    This is a far superior product to the other major brand. No cutting of pipe necessary. Skydeck did a great job with the layout and providing all of the items needed. Also, I found the skydeck pavers to be better than the locally aqured pavers. They are more consistant in thickness and have a less textured bottom. This leads to a flatter cleaner top surface. And to top it all off, I was able to speak with the owner of the company who was VERY helpful in the whole process. I highly recommend using Skydeck :-)

See all reviews on Google (opens in new tab)