The SkyJack pedestal system from SkyDeck USA eliminates the biggest time drains in paver pedestal installation. It arrives fully assembled, pre-mapped with detailed shop drawings, and adjustable on the fly. In real-world applications, this results in at least a 30% reduction in installation time, and often significantly more.

Labor is one of the biggest challenges in construction today. On-site man-hours are getting more expensive, crews are harder to find, and every extra hour on a project eats into your margin. That’s especially true with paver pedestal systems. While they’re designed to be faster than traditional methods, not all pedestal systems are actually efficient in the field.

Many still require time-consuming setup, assembly, and constant adjustments. One of the biggest challenges is simply figuring out pedestal heights. Installers often arrive on-site without a clear plan, leading to guesswork, incorrect orders, wrong pedestal heights, costly delays and rework, and wasted materials.

SkyDeck USA solves this problem before the job even begins. By providing detailed shop drawings that map out pedestal heights across the entire roof, installers walk onto the project knowing exactly what to do at every location.

On a 2,500 square foot project in Michigan, one installer was able to finish the project in five days with three people.  The PM on the job stated that this would have normally taken several days longer with a four-person crew using a PVC pipe-style pedestal system.  The competitor’s system would have cost this company about 45% more in labor on this project.

Another customer from Georgia stated, “As far as competitor pedestal systems, we’ve only had a couple of jobs where the owner had already purchased them, and we installed them. If we had to fully execute a paver pedestal system with PVC pipe, you’re realistically looking at close to double the install time, not even factoring in the added logistics of getting material to the roof, staging, and setup. If we were forced into using it, we wouldn’t recommend it—and if required contractually, we would double our labor and not provide a warranty.

Technical Features That Speed Up Installation

The time savings come from how the system is engineered, specifically to eliminate the slow steps found in other pedestal systems.

Fully assembled pedestals

Many pedestal systems arrive on-site as multiple loose components that need to be assembled, forcing installers to sort through parts, build each pedestal, and double-check everything before they can begin. SkyJack pedestals arrive fully assembled and ready to use. There are no confusing parts or pieces. Installers can set each pedestal in place and keep moving without stopping to build anything.

Twist-to-adjust mechanism

SkyJack pedestals use an integrated threading system that allows installers to quickly adjust height by simply twisting the unit, even with a paver sitting on top. There’s no stacking, no building pedestals on-site, and no complex assembly. You set it, adjust it, and move on. Minor shimming may still be used to fine-tune pavers and eliminate rockers or toe stubbers, but this is quick and minimal compared to systems that rely heavily on shimming for height adjustments.

Drill bit height adjustment tool

For faster installation, SkyDeck USA offers a drill bit adjustment tool that allows installers to spin pedestals up or down in seconds. This becomes especially valuable on larger jobs or when working with taller pedestal heights, saving significant time across hundreds or thousands of pedestals. Watch how to use the Drill Bit Tool with SkyJack Pedestals.

Hand adjustment tool

SkyDeck also offers a hand adjustment tool that allows installers to adjust pedestal height without removing the pavers on top. With many pedestal systems, height adjustments require lifting and resetting pavers, which slows down the process. This tool allows for quick, in-place adjustments, keeping installation moving and reducing unnecessary labor.

Optional self-leveling head and base slope correction

For sloped surfaces, SkyDeck offers an optional self-leveling head that compensates for slopes up to 5%. A base slope corrector is also available, allowing installers to compensate for slope at either the top or the bottom of the pedestal, without adding complexity or slowing down installation.

Dry installation

SkyJack is a fully dry system. There’s no mortar, no adhesives, and no cure time required. SkyJack keeps installation simple and continuous from start to finish.

How SkyDeck USA Quantifies the 30% Time Savings

The time savings, at least 30% and often more, come from eliminating the biggest inefficiencies found in other pedestal systems.

Reduced crew sizes

With fewer steps and no on-site assembly, smaller crews can handle the same amount of work. Other pedestal systems require more labor just to assemble and adjust each unit. SkyJack reduces labor at every pedestal location.

A true plug-and-play workflow

Most pedestal systems are not truly plug-and-play. Installers are often forced to cut PVC pipe to create pedestal heights, assemble multiple components, and stop to figure out height requirements in the field. SkyDeck USA removes that entire layer of inefficiency.

Every pedestal comes fully assembled and fully adjustable out of the box. And most importantly, pedestal heights are already mapped out before installation begins. SkyDeck USA provides detailed shop drawings that show exactly what pedestal height is required at every location across the roof. That means:

• Installers know exactly what to install at every point
• No guessing or re-measuring on-site
• No trial and error

Crews don’t show up to figure it out. They show up to install. From site prep to final surface installation, everything flows in a single continuous phase.

Faster sub-floor access

Pavers can be removed and replaced without disturbing surrounding areas, allowing for quick access to drainage or electrical systems. That reduces labor not just during installation, but throughout the life of the project.

Pre-Construction Support and Shop Drawings

The system is only part of the advantage. The planning behind it is just as important.

SkyDeck USA’s shop drawing and layout support is one of the most valuable parts of the system. Instead of leaving installers to figure out pedestal heights and layout in the field, everything is planned in advance. This eliminates guesswork, reduces mistakes, and significantly improves installation speed.

The system works with a wide range of surface materials, including porcelain pavers, concrete pavers, wood tiles, natural stone, turf, and green roof assemblies. This allows contractors to use one system across multiple project types without changing installation methods.

Each component is manufactured to tight tolerances, ensuring consistency across the system. Other pedestal systems with multiple parts or field assembly introduce more variability. SkyJack reduces that variability, which means fewer adjustments and faster installs.

Long-Term Value: Maintenance and Durability

Individual pavers can be removed and reinstalled without disturbing the rest of the deck. The simplicity of SkyJack makes this process faster and easier in practice. The system is designed to withstand environmental exposure, including moisture, temperature changes, and long-term wear, reducing future labor costs associated with repairs or replacement.

Despite being lightweight, the system is engineered to far exceed live and snow load-bearing requirements for commercial and residential applications. It delivers strength and safety without adding complexity to the installation process.

Frequently Asked Questions

How much does the SkyJack pedestal system reduce installation time? In real-world applications, the SkyJack system reduces installation time by at least 30%, and often significantly more depending on project size and complexity. The savings come from fully assembled pedestals, a pre-planned shop drawing package, and tools that allow height adjustments without removing pavers.

Do SkyJack pedestals require on-site assembly? No. SkyJack pedestals arrive fully assembled and ready to install. Unlike many competing systems that require cutting PVC pipe or stacking multiple components on-site, SkyJack units are set in place and adjusted with a simple twist. No assembly required.

What surfaces are compatible with the SkyJack system? The SkyJack system is compatible with porcelain pavers, concrete pavers, wood tiles, natural stone, turf, and green roof assemblies. This allows contractors to use a single system across multiple project types.

What are shop drawings, and why do they matter for installation speed? Shop drawings are detailed pre-construction layouts produced by SkyDeck USA that map the required pedestal height at every location across the roof. Instead of measuring and calculating heights in the field, installers arrive knowing exactly what goes where. This eliminates guesswork, reduces errors, and keeps installation moving without interruption.

Can pedestal height be adjusted after pavers are placed? Yes. SkyDeck offers a hand adjustment tool that allows installers to adjust pedestal height without removing the pavers on top. A drill bit tool is also available for faster adjustments on large installations.

Conclusion: Future-Proofing Projects with SkyDeck USA

Labor efficiency isn’t optional anymore. It’s critical to stay profitable and competitive. While many pedestal systems claim to save time, they still rely on on-site assembly, height guesswork, and slow installation processes.

SkyDeck USA takes a different approach. By combining fully assembled, fully adjustable pedestals with detailed pre-construction shop drawings, it removes the biggest time drains from pedestal installations before the job even starts. The result is faster installs, fewer labor hours, and real-world time savings of at least 30%, often more, depending on the project.

Contact us for project-specific time-saving assessments or email us at info@skydeckusa.com for a quote.